Archive
MEDICA TechnicalSupport
medicatechnicalsupport@fameco.odoo.com
RE: ES & EBG packs policy
Dear Tobias,
The shelf life for the ES and EBG reagent modules are one year from the date of manufacture. Please make sure to use them before this time.
Es and EBG reagent modules have dallas chip. When you install these reagent modules, the dallas chip reads the date and analyzer serial number ect.
When you install the EBG reagent module you can use it for 45 days. You can use ES reagent module for 35 days when you install it.
Regarding your questions:
- No, you can only use it until the expiration date. When it is expired you can’t use it any more. If you install one reagent module on it’s last day you can’t use it the day after or for 35 or 45 days because it will give you “expired reagent module” message.
- Unfortunately we don’t have this option on our reagent modules and you can swap them between analyzers.
But you can see from the print out that this reagent module was installed on which EBG analyzer for the first time:
- Please press 5 for second menu
- Press 4 for stored information
- Press 5 for reagent module
- Press 1 for status. Here you can see the analyzer’s serial number that the reagent module was installed for the first time.
Hope it helps.
Please contact us if you have any questions.
Best regards,
Hanna Parhizkar | Technical Support | hparhizkar@medicacorp.com
Medica Corporation | 5 Oak Park Drive, Bedford, MA 01730 | www.medicacorp.com
+1 781 275 4892 Main
+1 781 541 7403 Direct
+1 781 275 2731 Fax
From: Tobias Pfeifer <tobias.pfeifer@fameco.eu>
Sent: Wednesday, October 16, 2019 7:52 AM
To: MEDICA TechnicalSupport <medicatechnicalsupport@fameco.odoo.com>
Subject: ES & EBG packs policy
Dear Hanna,
two questions regarding the packs:
1. will the pack if installed on the last day of it's expiry (IN date) work through the whole 45 days, or will it be cut of to the date thats on the box?
2. where can I find guidance on how the packs are protected against swapping from one EBG to another EBG for example?
best regards
Tobias
--
|
Tobias Pfeifer | Geschäftsführung |
|
T: +49 89 248805810 | F: +49 89 248805819 |
|
FAMECO GmbH | Geschäftsführer: Tobias Pfeifer, Thomas Andersen |
|
Neumarkter Str. 34, 81673 München |
|
USt-IdNr. DE323800861 | Amtsgericht München HRB 248816 |
|
The company accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. |
Sent by FAMECO GmbH using Odoo.
durch Hanna Parhizkar - 04:00 - 16 Okt. 2019
Referenz
-
ES & EBG packs policy
Dear Hanna,
two questions regarding the packs:
1. will the pack if installed on the last day of it's expiry (IN date) work through the whole 45 days, or will it be cut of to the date thats on the box?
2. where can I find guidance on how the packs are protected against swapping from one EBG to another EBG for example?
best regards
Tobias
durch Tobias Pfeifer - 07:51 - 16 Okt. 2019-
RE: ES & EBG packs policy
Dear Tobias,
The shelf life for the ES and EBG reagent modules are one year from the date of manufacture. Please make sure to use them before this time.
Es and EBG reagent modules have dallas chip. When you install these reagent modules, the dallas chip reads the date and analyzer serial number ect.
When you install the EBG reagent module you can use it for 45 days. You can use ES reagent module for 35 days when you install it.
Regarding your questions:
- No, you can only use it until the expiration date. When it is expired you can’t use it any more. If you install one reagent module on it’s last day you can’t use it the day after or for 35 or 45 days because it will give you “expired reagent module” message.
- Unfortunately we don’t have this option on our reagent modules and you can swap them between analyzers.
But you can see from the print out that this reagent module was installed on which EBG analyzer for the first time:
- Please press 5 for second menu
- Press 4 for stored information
- Press 5 for reagent module
- Press 1 for status. Here you can see the analyzer’s serial number that the reagent module was installed for the first time.
Hope it helps.
Please contact us if you have any questions.
Best regards,
Hanna Parhizkar | Technical Support | hparhizkar@medicacorp.com
Medica Corporation | 5 Oak Park Drive, Bedford, MA 01730 | www.medicacorp.com
+1 781 275 4892 Main
+1 781 541 7403 Direct
+1 781 275 2731 Fax
From: Tobias Pfeifer <tobias.pfeifer@fameco.eu>
Sent: Wednesday, October 16, 2019 7:52 AM
To: MEDICA TechnicalSupport <medicatechnicalsupport@fameco.odoo.com>
Subject: ES & EBG packs policyDear Hanna,
two questions regarding the packs:
1. will the pack if installed on the last day of it's expiry (IN date) work through the whole 45 days, or will it be cut of to the date thats on the box?
2. where can I find guidance on how the packs are protected against swapping from one EBG to another EBG for example?
best regards
Tobias
--Tobias Pfeifer | Geschäftsführung
T: +49 89 248805810 | F: +49 89 248805819
FAMECO GmbH | Geschäftsführer: Tobias Pfeifer, Thomas Andersen
Neumarkter Str. 34, 81673 München
USt-IdNr. DE323800861 | Amtsgericht München HRB 248816
The company accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
Sent by FAMECO GmbH using Odoo.
durch Hanna Parhizkar - 04:00 - 16 Okt. 2019
-